Biomass burner under the exhaust grill can be modified
Biomass burners are good products for replacing electric, fuel, gas, and coal-fired steam boilers.
Biomass pellet burner with the following characteristics:
1. One-button start and stop, reducing the difficulty of manual operation;
2. Climbing type spiral feeding mode can prevent feed screw jamming and tempering;
3, full intelligent automatic detection system, can automatically detect machine failure, easy to repair in time;
4, using Japanese DDK variable speed motor feed, install frequency converter to prevent motor overload and damage;
5, detachable, changeable fire nozzle;
6, automatic temperature control, segmented combustion;
7. PLC automatically controls the silo separator valve;
8. Non-polluting and environmentally-friendly benefits: The sustainable use of energy is realized by using renewable biomass energy as fuel. The high-temperature segmented combustion technology has low emission of NOX, SO2 and dust in the flue gas, and is a better substitute for fuel (gas) burners and electric heating;
9, no tar, waste water and other waste discharge: the use of high temperature pyrolysis combustion technology, tar and other direct combustion in the form of gas, to solve the technical problems of high biomass gasification tar content, to avoid the water quality caused by washing tar Secondary pollution
10. High heating temperature: This technology uses secondary air distribution, and the furnace pressure is 500-700mm water column to ensure normal fluidization in the jet zone. Continuous feeding can be continuously produced, the flame is stable, and the temperature in the high temperature section can reach 1300 °C, which is widely used in industry;
11. Wide range of equipment applications: Zhonglang Biomass Burner is suitable for coating line body, electroplating factory oven, boiler, small power station boiler, industrial furnace, incinerator, melting furnace, die casting machine, drying equipment, kitchen equipment , drying equipment, food drying equipment, ironing equipment, baking equipment, road construction machinery, industrial annealing furnaces, fuel, gas, coal-fired large-tonnage boilers, asphalt heating equipment and other thermal energy industries;
12. Low investment operation cost: The biomass combustion mechanism is designed reasonably. When it is used for various equipments, the transformation cost is low. The operation cost is lower than the fuel boiler heating cost by more than 60%, and the gas boiler heating cost is reduced by more than 40%. It is an electric furnace and oil. Better choice for energy saving and environmental protection renovation and upgrading of furnace and gas furnace