Description of digital display temperature control stainless steel electric heating plate / digital display stainless steel electric heating plate

I. Introduction: Digital display temperature control stainless steel electric heating plate and temperature control type are widely used in baking, drying, agricultural shrinkage and other temperature experiments, which are common tools in the laboratory. Its main features: 1. The heater is made by special molding process, and there is no warping deformation at high temperature. 2. The working panel is made of stainless steel, which has superior corrosion resistance and uniform working surface temperature. 3, heating up quickly and evenly, easy to operate, safe to use. Second, digital display temperature control stainless steel electric plate technical instructions: 1. Model: HAD-DB-3A2. Working power: 220V50Hz3. Heating power: 1000W4. Temperature control range: room temperature +20 ° C ~ 400 ° C 5. Volatility: ± 1 °C6. Temperature control mode: Microcomputer PID control, PT100 sensor. 7. Can choose internal sensor or external sensor. 3. Digital display temperature control stainless steel electric heating plate. Maintenance 1. Wipe the working surface clean before use. No water droplets, dirt, dirt and other foreign matter are allowed on the surface. 2. Place a sample test bottle or other utensils. 3. Turn on the power, close the power switch, the indicator light is on, the temperature control type sets the required temperature value, and the hot plate is in working state. 4. When the hot plate is in working condition, there should be special care. 5. After the work is completed, turn off the power switch and cut off the power. 6. After the work surface is cooled, handle it as required.