Electric heating how to maintain electric heating maintenance precautions

With the progress of the times, family heating methods are also very diversified. Among them, the small size of electric heating and quick heating are welcomed by many friends. Most of the friends are familiar with the use of electric heating. But how do you do maintenance? Electric heating maintenance should pay attention to what? Let's learn about it together.

What is electric heating

Electric heating is a product that converts electrical energy into heat energy. At present, domestic electric heating methods are mainly divided into radiant heating of heating cable floor, electric heating film heating, and electric heating, among which electric heating has the most rapid development. The best-selling electric heater stems from its numerous advantages: Since electricity is a clean energy source, convection-type electric heaters are non-emission, non-polluting, noise-free and environmentally-friendly; they are easy to use, electricity is hot, and power is off, even if it is In northern areas with central heating, electric heating can also assist in heating.

Household electric heating maintenance

In winter, people often use electric heaters. Households generally store electric heaters when they are not in winter, and when they are used in winter, electric heaters have accumulated thick dust. Don't worry. Use, first clean the heater, if the heater is not very dirty, dip the cloth with tap water and then wipe it, but if the heater has accumulated thick dust, use detergent water to dip Wash the cloth and wipe it. Sometimes the inside of the heater is not easy to clean. It can be washed with tap water or detergent water with a small watering can and then wiped with a rag.

Because the heater will release a lot of hot gas, in order to ensure the normal operation of the heater, it is best to place the heater in a place conducive to heat, and do not put the heater directly on the floor to avoid the heat it releases Burn the floor, especially the solid wood floor, in order to avoid this, it is best to put something under the heater to block it and the floor directly contact.

Electric heating maintenance matters needing attention

First, the cause of the failure:

1. The power plug and socket are not in good contact.

2. The power switch is bad or damaged.

3. The heating wire breaks.

4. The thermostat switch is in poor contact.

5. The electric heating line is in a half-off state, causing ignition and burning smell.

6. The electric wire lead wire is in poor contact with the power source and generates an electric arc.

Second, maintenance methods:

1. Repair plugs and sockets to make them in good contact.

2. Repair the mini-bed switch to make it in good contact, and replace it with a new one if it is seriously damaged.

3. Use a multimeter R×1k file to detect the electric blanket. The two ends of the power cable should generally be 500Ω to 800Ω. If the pointer is not moving, it is a broken circuit. Carefully find the disconnected area, tangled and welded well, and do insulation treatment.

4. According to the specific principle of temperature maintenance: 1. To find the broken place, welding and re-wrapped with insulating material. 2. Reconnect and ensure reliable contact. 3 strictly in accordance with the requirements of the product specification, can not be too long power, in order to avoid accidents.

Summary: The above is about the introduction of electric heater failure and electric heating maintenance , I believe we have a certain understanding of the common failure of electric heating, and look forward to helping everyone.

Radiator Heater Heater Fireplace Heater Parlor Heater Bath Electric Heater