Hardware electric tools operation precautions

Hardware electric tools are commonly used in modern industrial products, which are generally powered by electricity, but in the process of using some attention to matters, the operator in the use of electric tools need to pay attention to what matters?

Power Tools Operation Notes:

1, Before using the tool, it should be full-time electrician test wiring is correct, to prevent the zero line and the wrong line caused the accident.

2, long-term shelved or damp tools before use, should be measured by the electrical insulation resistance meets the requirements.

3, the tool comes with a soft cable or cord can not take long, when the power and workplaces farther away, should be used to solve mobile barrier.

4, the original tool plug may not be removed or replaced at will, when the original plug is damaged, it is forbidden to insert the wire directly into the socket without plug.

5, found the tool shell, handle rupture, should stop using, to be replaced.

6, non-full-time staff may not disassemble and repair tools.

7, rotating tools in the holding tools should be guarded.

8, the workers wear insulation protection equipment (insulated shoes, insulated gloves, etc.) as required.

9, Department of power, must be equipped with leakage protector.

10, the use of overload is strictly prohibited, pay attention to sound and temperature rise, abnormalities should be immediately shut down inspection.

In short, for operational safety, Xiao Bian suggested that you power tool operators in strict accordance with their operating norms and the use of precautions to operate electric tools to ensure safe operation.