Installation of high-temperature electric, pneumatic solenoid valve must know

High-temperature solenoid valve (High electromagnetic valve) belongs to the pilot-operated solenoid valve, mainly from the remote control of media in the pipeline and two-position automatic adjustment role. High temperature solenoid valve is widely used in heating devices, industrial furnaces, chemical equipment, HVAC, and shipbuilding, etc. play an indispensable role. It can be said that the high temperature solenoid valve is closely related to our life, its advanced features to improve the efficiency of the use of pipeline media, and its superior protection performance allows users and manufacturers peace of mind. Although high-temperature solenoid valve with superb protective performance, but there are still many problems when installing need our attention and solve, so as to avoid leaving the future may cause human error of the machine. So, when installing high-temperature solenoid valve need to pay attention to what? First, before installing high-temperature solenoid valve, be sure to carefully read the instructions, carefully check the solenoid valve models and specifications, follow the instructions on the steps to install step by step. Second, before connecting the high-temperature solenoid valve to the pipe, be sure to wash the pipe with clean water to clean the foreign objects in the pipe to prevent the mechanical trouble caused by the blocked pipe. Third, there is a tendency for water vapor to condense in the low-lying areas of the pipeline, and accumulation of debris can easily increase the possibility of machine failure. Therefore, do not install the high-temperature solenoid valve in the low-lying area of ​​the pipeline. Fourth, it is absolutely not possible to install this valve in dangerous explosive situations! In addition, the application of high temperature solenoid valve medium is oil, steam, corrosive fluids, users should pay attention to the use of media after installation, to prevent improper use should be caused by damage to the machine.