Manual valve PK electric valve: the traditional valve maintenance cost is too much overall calculation is not as good as the electric valve

Many people think that the electric valve is expensive and the cost of use is high. It is known that, in fact, if the overall calculation, the traditional valve should be equipped with many accessories and pipeline installation, the price is not dominant, but it must bear more maintenance costs. .

As far as the electric valve is concerned, the electric valve has the advantages of easy assembly, low failure rate and meeting the automation requirements of the industry, and is a more cost-effective choice for the operator. Because the use of the general traditional pneumatic valve, it is necessary to have piping, solenoid valve and compressor to match, and the electric valve is driven by the motor, the installation is simple and easy, and the electric valve is installed with the original self-control circuit of the factory, which can save other the costing payment. In addition, the motor drive mode is smooth and open, and there is no shortcoming of excessive instantaneous force, and the failure rate can be greatly reduced.

According to relevant sources in the industry, valves are mostly used to control the flow and flow of various fluids, such as water, oil, chemical liquids, etc., based on parameters such as temperature, pressure and flow. The control valves commonly used in factories include pressure reducing valves, pneumatic fixed temperature valves, solenoid valve constant temperature systems, proportional control valve constant temperature systems, and temperature control valves. When selecting various types of automatic valves, factors such as the type of heat engine, the required accuracy, the quality of the control valve, the pressure drop, the flow rate and its structure, the failure rate, the manufacturer's credit and after-sales service should be considered to achieve economical and practical purposes.

Concerned about surprises

Label: manual valve PK electric valve: the traditional valve maintenance cost is too much overall calculation is not as good as the electric valve

Previous: The electrical system of the governor will appear 5 points due to poor maintenance. Next: Kitchen electric equipment to avoid four major misunderstandings