HC003 high branch electric scissors basic composition:
1、Electric scissors 1 2、Battery 1 3、Charger 1 4、Power cord 1.5m long 1
5, battery, scissors bag bag 1 6, a tool box and a set of random files
Suitable for: orchards, greening companies, villas, homes, factories, schools, hospitals, etc.
Shear range: 3 meters in height 15MM in diameter to 25MM in soft branch (hardwood: Holly, Cyclovirobuxine, Cypress, Cyperus, Lagerstroemia, Tea tree, etc. Soft branch: grape branch, fruit branch)
First, this product is battery-driven electric scissors. Its structure: fixed blade, moving blade, rotation, lithium battery, micro-control, charge indicator, charger plug, battery charger and remove the battery button and other nine parts, charging power supply is 110v-240v. It is mainly applied to pruning branches and plants. It is simple and convenient to use to improve work efficiency by 3-5 times. The pruning quality is obviously higher than that of ordinary hand scissors.
Second, the use of process introduction
1. Charge the battery for 5 hours (first charge for 12 hours)
2. Before using the tool, unplug the charger and disconnect the tool from the charger (the tool will not work when connected to the charger)
3, remove the blade sheath
4, manually turn on the power
5, before starting to cut, let the cutting blade idle for a few seconds, listen to whether the sound is noisy and too slow and too fast
6. Start working
Third, pay attention to matters
1. Always check that the power supply voltage matches the voltage indicated on the charger's nameplate (a charger rated at 230V or 240V can also be connected to a 220V power supply)
2. Check whether the tool is working properly before each use. If any malfunction occurs, it should be repaired by a qualified person. Never open the tool without authorization.
3, Do not use tools/chargers damaged; please send them to the officially registered SKIL service point for safety inspection
4, both hands should move away from the cutting blade
5, both hands should be away from the cutting area; the hand must not reach under the material for any reason when cutting
6. Make sure that any material or surface under the cutting area is not damaged by the cutting blade
7. Do not leave the tool unattended
8. This tool is not a toy; it should be kept out of reach of children
9. Cannot use this tool by persons under the age of 16.
10. Do not clamp tools with vise
11. If an electrical or mechanical failure occurs, turn off the tool immediately or unplug the charger from the power supply
12. Don't let the tool/charger/battery get into the rain
13. Hold the tool on the insulated grip surface when handling it, because the cutting blade may touch the dark line. Touching the live wire may charge the exposed metal parts of the tool and cause the operator to get an electric shock.
14. When you make any adjustments or replace accessories, remove the tool battery
15, do not pull or hang the charger through the wire
16, never pull the charger cable to disconnect the charger and power supply
17. Keep charger wires away from heat, oil, and sharp edges
18, the tool / charger / battery stored in the temperature does not exceed 40 °C or not less than 0 °C position charging
19. Only use the charger supplied with the tool to charge the battery
20. Do not charge outdoors
21, do not charge the battery in a humid environment
22, Do not use the charger when the power cord or plug is damaged; immediately change the wire or plug at the officially registered SKIL service point
23, do not use a damaged battery, should immediately replace the damaged battery
24, do not dismantle the charger or battery
25, the battery will explode when put into the fire, so no way to barbecue battery
Fourth, the working environment and objects
1, no power outdoor work
2, manual pruning shears can not cut branches or trim too much effort branches
V. Work proposal
1. Wear protective gloves when working
2. Don't get too close to the trunk when cutting. This is good for wound healing
3. Cut from the bud 8mm when cutting
4. Should be cut obliquely from the position away from the sprout when cutting, which can reduce the loss of moisture
5, do not cut off the stems and sprouts of the branches
6, pruning grows weakly branches or necrotic and damaged branches
7, do not use scissors to cut hard things
Six, performance and advantages
1. Reduce manpower greatly
2, use simple and convenient to improve work efficiency 3-5 times
3, pruning quality is significantly higher than the general manual scissors
